Polytek silicone rubber has been tested in an independent laboratory and found to be compliant with 21 CFR 177.2600 (issued federal regulations) for rubber articles for reusable food contact surfaces that have been accurately measured, thoroughly mixed and fully used

Cooking or food processing applications include:

candy mold

fondant mold

CBD or THC gummy molds

Ice molds and trays

chocolate mould

butter mold

Cake Decorating and Fondant Molds

Gaskets and seals for food processing environments

Advantages of Polytek Silicone Rubber:

Silicone molds provide non-stick release properties for many food-based casting media

Dimensional stability for precise dispensing of dispense volumes

easy to clean

Properly constructed and maintained molds have long life

Processing method:

Check individual product technical bulletins for handling instructions. Before using silicone molds or parts for food, thoroughly wash molds or parts with water and a dishwashing detergent solution, rinse and dry. If applicable, wash molds or parts thoroughly between batches. If baking, do not expose the mold to temperatures above 400°F.

*Compliance with this regulation does not imply FDA approval of these silicone rubbers - users of these materials must also comply with all applicable FDA requirements. Adding additives, such as color pigments, creates untested conditions, so no statement can be made about its compliance with the FDA.

Amazing Remelt is a non-toxic, reusable mold making material for room temperature or low exothermic materials.

Amazing remelting temperature softens at 120˚F and becomes liquid at 135˚-140˚F. Remelt in oven, microwave or double boiler. It can be remelted and reused to make new molds again and again.

Ideal for making molds for smaller items such as jewelry, embellishments, push molds for polymer clay, resin molds or food molds such as chocolate, ice, gelatin and fondant.

Remelt meets FDA standards for food contact.

The following mold silicone rubbers are FDA evaluated and tested (FDA 21 CFR 177.2600)